2006 int mxt 9 volts on antenna cable

Home / the12volt's Install Bay / Car Audio / 2006 int mxt 9 volts on antenna cable (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

eldiablo25

Member - Posts: 1

Joined: February 23, 2007

Location: United States

Posted: February 23, 2007 at 8:58 AM / IP Logged

I am installing a second CD radio in the bed for tailgating, in a 2006 International MXT pick up truck . I want to use the same antenna for both tuners and after the Motorola antenna Y cable I bought I am getting 9 volts on the antenna coax cable from the factory in-dash Eclipse DVD.

Back to Top

master5

Silver - Posts: 1,123

Joined: October 10, 2006

Location: United States

Posted: February 23, 2007 at 9:53 AM / IP Logged

If the antenna is working with the original tuner and nothing has burned up there shouldn't be any problem.

However you really didn't give enough info... for example how did you reference this voltage reading? Was it across the coax shield and center conductor? Or were you simply referencing ground on the shield..which would be normal to measure around 9v taking into consideration the resistance over the length of the cable.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 int mxt 9 volts on antenna cable

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.