the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

dodge caravan stereo no power


Post ReplyPost New Topic
< Prev Topic Next Topic >
rps0470 
Member - Posts: 3
Member spacespace
Joined: April 16, 2007
Location: Canada
Posted: April 16, 2007 at 3:38 PM / IP Logged  

After installing a PYLE DVD player and FM modulator my factory installed radio/CD player stopped working. I can stiil eject the cd and insert cd as usual but no audio. Radio is not working either. I have not touched any cabel of cd player. I  used the ciggrate lighter wires. It is Dodge caravn 2003 SE . If somebody know what should be wrong please reply.

wlmpwlmp 
Copper - Posts: 59
Copper spacespace
Joined: December 20, 2006
Location: Canada
Posted: April 16, 2007 at 3:44 PM / IP Logged  

your have blown the fuse for the switched power is my guess. Your cd still ejects becasue that runs on the constant memory power, which obviously that fuse is not blown. check for the fuse for radio!! I hope this helps.

WesMan
rps0470 
Member - Posts: 3
Member spacespace
Joined: April 16, 2007
Location: Canada
Posted: April 17, 2007 at 6:42 AM / IP Logged  

FUSE is OK. Is it related to the ciggarate lighter wires? I have used only two wires(which shows 12V while ignition is ON) of the three connected to the lighter and third one is left alone.When I press time button on the radio I can see the time for a while.

wlmpwlmp 
Copper - Posts: 59
Copper spacespace
Joined: December 20, 2006
Location: Canada
Posted: April 17, 2007 at 7:14 PM / IP Logged  
you getting the time to show when you press the button only proves more that the switched fuse is toast and your memory fuse is fine.  Im not sure on your van but my gm the cig lighter is directly tied into the radio , and dome light fuse.  you mention 3 wires at the ciggy lighter? i believe should only be 2 there power and ground.  For sure something you have done involving the cig lighter is directly related to the radio!! And if all the fuses check out then try undoing what you have done and see if the deck works.
WesMan
rps0470 
Member - Posts: 3
Member spacespace
Joined: April 16, 2007
Location: Canada
Posted: April 19, 2007 at 8:19 AM / IP Logged  
Yes, I just connected the cigar wires back and deck is working now. Thanks wlmpwlmp.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer