unhooking amplifier

Home / the12volt's Install Bay / Car Audio / unhooking amplifier (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

kingerik68

Member - Posts: 16

Joined: May 31, 2006

Location: United States

Posted: May 29, 2007 at 12:14 AM / IP Logged

I own a 1998 Jeep Cherokee. I have an Audiobahn 4002V that is running to 2 pairs of Audiobahn ABC525Ts. The speakers are blown and the outputs are blown which has caused the amp to go into protection mode. I also have an Audiobahn 8002V running to a pair of Audiobahn AWC12T subs. I want to unhook the amp that is malfunctioning. I'm good with my hands but a novice at this installation stuff. I know that you have to remove the fuse. How can I tell which fuse goes to which amp and can anyone offer some simple instructions on uninstalling the amp?

Back to Top

loosingmymind

Copper - Posts: 103

Joined: August 24, 2004

Location: United States

Posted: May 29, 2007 at 12:36 AM / IP Logged

Dangerous to give that advice without seeing the car! I would take it to the shop that installed it to have it removed. They may not honor your warranty if you mess with it yourself. Or, if you think you can do it, try removing one fuse and turning over the key. If your subs kick on; you got the right one. If not, put it back, it's the other one. Make shure you well terminate (cut and wrap) each wire you remove from the faulty amp BEFORE you turn the key back over. You can't learn till you try.

Good luck.

David Fancher

USACi World Finals 2006

4th Place SQ PRO 601+

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

unhooking amplifier

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.