07 tacoma dbl cab factory amp

Home / the12volt's Install Bay / Car Audio / 07 tacoma dbl cab factory amp (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: August 08, 2007 at 10:10 PM / IP Logged

Is it in the back next to the JBL sub? Have a customer that want to replace the sub, and the sub portion of the factory amp. The idea is to simply find the outputs of the amp that power the sub, unhook them (if we can keep the rest of the amp playing) Use the inputs for a peripheral hi to low, and add an Alpine PDX 1.600 He want's the deck to remain factory....of course.

Has anyone done this type of set up? The jobs coming in next Monday!

swerks

Copper - Posts: 224

Joined: January 12, 2003

Location: Canada

Posted: August 08, 2007 at 11:23 PM / IP Logged

the amp is on the pass ide under the rear seat. the set up should work put a sub and pair of focal k2p's in one a couple months ago used seperate amp for sub but used a aftermarket deck

Steve Sverdahl

Swerksound Auto Electric

Red Deer Alberta

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: August 09, 2007 at 10:26 AM / IP Logged

It's not under the seat....either side. That was the first place I looked 07 tacoma dbl cab factory amp -- posted image.

swerks

Copper - Posts: 224

Joined: January 12, 2003

Location: Canada

Posted: August 09, 2007 at 3:15 PM / IP Logged

there should be a "trap door" under the pass rear seat the amp is in there

Steve Sverdahl

Swerksound Auto Electric

Red Deer Alberta

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: August 10, 2007 at 1:09 AM / IP Logged

Notes

Amplifier is located near right "C" pillar.

All the way in the back. This truck has no trap door. The seats fold up forward like a full size truck. The cute little JBL sub is behind the pass. side.

Now heres another wild thing!

Left Front +	Red	Line level output
*Left Front -*	*NCA*	*Common signal ground connecting radio pin R1-10 to amplifier pin R1-6*
Right Front +	Green	Line level output
Left Rear +	Black	Line level output
Right Rear +	White	Line level output How does one use a peripheral SVEN 2 on this?

swerks

Copper - Posts: 224

Joined: January 12, 2003

Location: Canada

Posted: August 10, 2007 at 8:44 AM / IP Logged

the truck i did must have been an extended cab its been a couple months so im not sure

Steve Sverdahl

Swerksound Auto Electric

Red Deer Alberta

swerks

Copper - Posts: 224

Joined: January 12, 2003

Location: Canada

Posted: August 10, 2007 at 8:46 AM / IP Logged

use the sub output wires for your input take them rigt from the fact sub

Steve Sverdahl

Swerksound Auto Electric

Red Deer Alberta

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

07 tacoma dbl cab factory amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.