2 pdx amps to 3 subs

Home / the12volt's Install Bay / Car Audio / 2 pdx amps to 3 subs (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mikejc

Member - Posts: 23

Joined: October 21, 2003

Location: Canada

Posted: August 24, 2007 at 6:35 AM / IP Logged

Is it possible to power three 12" DVC 2ohm subs with one PDX 1.1000, and one PDX 1.600 and get the same power output on all three subs. I already wired it up with the 1000watt amp powering 2 subs at a 2ohm load, and the 600 watt amp powering the third at a 4ohm load. The sub wired to the 600watt amp was hitting alot harder then the other two. Is there any way to get them to all hitt the same? oh yah the box has no dividers in it.

Back to Top

haemphyst

Platinum - Posts: 5,054

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: January 19, 2003

Location: Michigan, Bouvet Island

Posted: August 24, 2007 at 7:28 AM / IP Logged

No. Looks like new woofers are in order.

It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 24, 2007 at 7:40 AM / IP Logged

Since you already have the equipment and it is already installed, try turning the gain down on the 600 so that the movement of that woofer matches the movement of the other 2.

Back to Top

jvillefinest

Copper - Posts: 255

Joined: December 29, 2003

Location: Florida, United States

Posted: August 24, 2007 at 1:30 PM / IP Logged

i dont think its possible to make them exactly the same but i know if you do alot of tuning you can get it close. because a friend of mine did this with 3 10w7s with a jl1000/1 and a 500/1. sounded great

2007 Acura TSX

SQ setup in the works

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2 pdx amps to 3 subs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.