popping noise

Home / the12volt's Install Bay / Car Audio / popping noise (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

wes5314

Member - Posts: 26

Joined: June 26, 2004

Location: United States

Posted: October 10, 2007 at 10:15 AM / IP Logged

I have pioneer 850-mp and 2 audiobahn 1200q's wired at 4ohm ,2 mtx 2300 ,my problem is when i turn my volume from 0 to 1 my speakers pop ,even when changing radio stations it does the same thing any ideas?

wes5314

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: October 10, 2007 at 10:42 AM / IP Logged

Sounds like bad grounds.

Support the12volt.com

sarcomax

Copper - Posts: 276

Joined: November 09, 2005

Location: California, United States

Posted: October 10, 2007 at 10:45 AM / IP Logged

I would say grounding issues, either the ground for the radio itself, or the all to common pioneer rca connection issue. The ground (outer) portion of the rca's has a very easy to blow fuse on it. The fix is to attach a wire to the outer shield and then attach the other end to ground. Good luck!

wes5314

Member - Posts: 26

Joined: June 26, 2004

Location: United States

Posted: October 10, 2007 at 2:53 PM / IP Logged

yeah thats what i thought to so i hooked up a ground and attached to rca's and still does it ,It also does it when u turn it on so i went as far as to make sure the radio was grounded so i sanded the metal down and still have the problems , I hooked up a noise filter and still has popping noise , I was also thinking maybe bad rca's ....

wes5314

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

popping noise

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.