the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

what do you think about this amp

Home / the12volt's Install Bay / Car Audio / what do you think about this amp (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
spedfix 
Member - Posts: 5
Member spacespace
Joined: November 14, 2007
Location: Illinois, United States
Posted: November 14, 2007 at 10:56 PM / IP Logged  
Specifications: *Power output: 125 watts RMS x 2 (4 ohm load), 200 watts RMS x 2 (2 ohm load), 800 watts max x 2 (4 ohm load) *Total Harmonic Distortion (THD): 0.04% *Signal to Noise ratio (S/N): 95 dB *Input sensitivity: 250 mV-2.5 V *Frequency response: 15-30,000 Hz *Dimensions: 15"L 11-1/3"W 2-1/4"H *Two-year manufacturer's warranty.
  • Remote bass level control
  • Electronic crossover network (low / full / high)
  • Bass boost circuit
  • MOSFET PWM Power Supply
  • High and low level inputs
  • 2-ohm stable
  • Power and protection LED indicators
  • Soft turn-on circuit

the price is 109.00 $

I will be using this for 2 750 watt swiss audio 12"(each at 4ohm's) let me know you think

jmelton86 
Gold - Posts: 1,228
Gold spacespace
Joined: February 07, 2007
Location: South Carolina, United States
Posted: November 14, 2007 at 11:14 PM / IP Logged  

With 2 4ohm subs, you'll only be able to get about 125Wrms x 2 from the amp -125Watts to each sub.

What is the brand? Or, what size fuse(s) does it have in it?

2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
spedfix 
Member - Posts: 5
Member spacespace
Joined: November 14, 2007
Location: Illinois, United States
Posted: November 14, 2007 at 11:39 PM / IP Logged  

pyle

Yeah was lookign at the wrong rating don't see a fuse size

I am looking at this one too

Pyle PLA2840 2x4000W Amplifier

Specifications: *Power output: 300 watts RMS x 2 (4 ohm load), 450 watts RMS x 2 (2 ohm load), 2000 watts max x 2 (4 ohm load) *Total Harmonic Distortion (THD): 0.04% *Signal to Noise ratio (S/N): 95 dB *Input sensitivity: 250 mV-2.5 V *Frequency response: 15-30,000 Hz *Dimensions: 21"L 11-1/3"W 2-1/4"H *Two-year manufacturer's warranty.
  • Remote bass level control
  • Electronic crossover network (low / full / high)
  • Bass boost circuit
  • MOSFET PWM power supply
  • High and low level inputs
  • 2-ohm stable
  • Power and protection LED indicators
  • Soft turn-on circuit

my speaker are 350 rms 750peak this should work good right

spedfix 
Member - Posts: 5
Member spacespace
Joined: November 14, 2007
Location: Illinois, United States
Posted: November 14, 2007 at 11:43 PM / IP Logged  
the above seems to pretty good price wise @ 189.50 to what do you guy think
dwarren 
Platinum - Nominee - Posts: 1,811
Platinum - Nominee spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 03, 2004
Location: California, United States
Posted: November 14, 2007 at 11:45 PM / IP Logged  

I would avoid Pyle like the plague.

I can totally understand some one who is on a budget or simply does not want to spend an arm and a leg on equipment, but brands like this are not worth any amount of your money. Perhaps you are limited by your budget, but for not a whole lot more you may be able to get some thing worth while, that will actually perform!

jmelton86 
Gold - Posts: 1,228
Gold spacespace
Joined: February 07, 2007
Location: South Carolina, United States
Posted: November 14, 2007 at 11:46 PM / IP Logged  

You already have the 2 (4ohm, 350Watts RMS) subs?

What is your spending limit? Pyle is not that great, at all. You're better off getting a CEA-compliant amp that is rated for half the power then what the Pyle claims.

2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
jmelton86 
Gold - Posts: 1,228
Gold spacespace
Joined: February 07, 2007
Location: South Carolina, United States
Posted: November 14, 2007 at 11:47 PM / IP Logged  
Also, for the money you're better off getting a mono amp stable @ 2ohms.
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
tcss 
Silver - Posts: 1,623
Silver spacespace
Joined: June 07, 2004
Location: United States
Posted: November 15, 2007 at 12:01 AM / IP Logged  
If that's your max budget, get a used name brand amp on Flea-Bay.
There is no such thing as free installation!
coppellstereo 
Silver - Posts: 785
Silver spacespace
Joined: November 21, 2005
Location: United States
Posted: November 15, 2007 at 9:56 AM / IP Logged  
I havent compared prices in a while, but I used to buy stuff from www.ikesound.com
aznboi3644 
Gold - Posts: 2,600
Gold spaceThis member consistently provides reliable informationspace
Joined: May 01, 2006
Location: United States
Posted: November 15, 2007 at 5:04 PM / IP Logged  
pyle sucks....the output is nowhere even near those ratings..
300 watts rms x 2 channels at 4 ohm load...more like 50-100 weak sauce watts

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer