oem chrysler infinity can i eq?

Home / the12volt's Install Bay / Car Audio / oem chrysler infinity can i eq? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sum1snzeros

Member - Posts: 14

Joined: November 20, 2007

Posted: December 12, 2007 at 5:09 PM / IP Logged

Have a 07 Pacifica with OEM 7 speaker Infinity system. Wiring diagram shows left/right signal and PCI bus wire from head to remote amp. I think fade and balance occurs at amp by control signal passed through PCI.

Can I intercept the left/right signal with a line level EQ (Like AudioControl EQL) so I can EQ the whole system? OR does the left/right not just carry audio content and a inline EQ might screw everything up?

Thanks for any insight!

sum1snzeros

Member - Posts: 14

Joined: November 20, 2007

Posted: December 13, 2007 at 9:39 AM / IP Logged

One thing I forgot to inquire that may pitch the whole idea anyway. It the audio signal between the head and amp on an OEM Infinity System like this pre-amp or speaker level?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

oem chrysler infinity can i eq?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.