LED bulbs

Home / the12volt's Install Bay / Motorcycle Electronics / LED bulbs (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

paul k

Member - Posts: 1

Joined: June 24, 2006

Location: Canada

Posted: June 24, 2006 at 7:46 AM / IP Logged

hi

i change turn signal bulbs 1156 on my bike with led 12 v bulbs 1156 front bulb is not working and rear is flushing very fast how do i make them work

Back to Top

idealrides

Member - Posts: 3

Joined: June 25, 2006

Location: Netherlands Antilles

Posted: June 25, 2006 at 11:55 PM / IP Logged

LED's are polarity sensitive... make sure the 1156 socket up front supplies +12v to the center contact. Also you need load equalizers (resistors) for your signals or you may be able to swap to an electronic signal relay.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

LED bulbs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.