kawasaki ninja 07

Home / the12volt's Install Bay / Motorcycle Electronics / kawasaki ninja 07 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

pitoaudiovisual

Copper - Posts: 388

Joined: April 25, 2005

Location: Pennsylvania, United States

Posted: May 24, 2007 at 1:18 PM / IP Logged

Does any know how difficult it is to put an alarm on a motorcycle.. What is the goin rate to install one and also if anyone has paperwork or tips all is appreciated..thanks....

Confidence is the key to any project!!

Back to Top

Search for other posts by pitoaudiovisual

lsondubz

Copper - Posts: 193

Joined: September 20, 2005

Posted: May 24, 2007 at 2:15 PM / IP Logged

They are pretty easy provided there is enough room for the module, Basic 12V and Ground to battery, youll have to test the wires for the turn signals, Merc Switch/Tilt Sensor, and an Ignition lead right off of the cylinder, Ive done a few lately and they really arent that bad, I just tell customers about 2-3 hours labor for basic system and the Merlin Motorcycle Alarm from DEI...

Back to Top

pitoaudiovisual

Copper - Posts: 388

Joined: April 25, 2005

Location: Pennsylvania, United States

Posted: May 25, 2007 at 5:28 PM / IP Logged

thanks i will see if i can do it.

Confidence is the key to any project!!

Back to Top

1fkn1998accord

Member - Posts: 2

Joined: January 30, 2007

Location: United States

Posted: May 30, 2007 at 5:57 PM / IP Logged

just like lsondubz said...just test the leads and place the alarm modual in a safe area...ive put a codealarm remote start in 2 bikes already and it worked well..even when the bikes start up by them selves...the bikes i did was a 2002 gsxr 600 and a 07 850 bulivard both are from suzuki

Back to Top

Search for other posts by 1fkn1998accord

pitoaudiovisual

Copper - Posts: 388

Joined: April 25, 2005

Location: Pennsylvania, United States

Posted: June 10, 2007 at 9:16 AM / IP Logged

i normally charge about 125 to 150 for cars but just wondering if the price is about the same for a motorcycle.

Confidence is the key to any project!!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

kawasaki ninja 07

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.