how to reset passlock

Home / the12volt's Install Bay / Car Security and Convenience / how to reset passlock (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

opj38

Member - Posts: 31

Joined: November 02, 2002

Location: Canada

Posted: January 02, 2008 at 7:47 AM / IP Logged

Does anybody know how to reset the passlock 2 . car wont turn over.

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: January 02, 2008 at 8:24 AM / IP Logged

turn the key to run....leave it for about 10 min.

Why did it all of a sudden quit working? Are you attempting a remote start?

You might want to give a little more info here.

Look here for some more info.

opj38

Member - Posts: 31

Joined: November 02, 2002

Location: Canada

Posted: January 02, 2008 at 9:26 AM / IP Logged

yes trying to install remote, was checking the resistence value to bypass and started the car by mistake. 2006 saturn Ion. passlock 2 next generaton.

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 02, 2008 at 10:01 AM / IP Logged

your suppose to start then cut and measure the resistance

RESET

turn key to run

open driver door and leave it open

come back in 10 min and the light will be gone, try to start with key, if it doesn towrk, leave it for another 10.

opj38

Member - Posts: 31

Joined: November 02, 2002

Location: Canada

Posted: January 02, 2008 at 10:09 AM / IP Logged

Thanks for the reply, will give it a try.

opj38

Member - Posts: 31

Joined: November 02, 2002

Location: Canada

Posted: January 02, 2008 at 11:53 AM / IP Logged

tedmond wrote:

your suppose to start then cut and measure the resistance

RESET

turn key to run

open driver door and leave it open

come back in 10 min and the light will be gone, try to start with key, if it doesn towrk, leave it for another 10.

i ve noticed that when key turns to start position all lights shut off it wont even crank.

when key turns to start position security light comes for a while then goes

thanks for all helping me

opj38

Member - Posts: 31

Joined: November 02, 2002

Location: Canada

Posted: January 02, 2008 at 2:07 PM / IP Logged

thanks aal the guys in this forum

finaally find the problem 2 amp fuse [ign fuse]was blown in fuse box located drivers side panel

changed fuse it starts rightway

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how to reset passlock

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.