vats in buick

Home / the12volt's Install Bay / Car Security and Convenience / vats in buick (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tools

Member - Posts: 23

Joined: November 20, 2005

Location: Canada

Posted: January 05, 2008 at 1:56 PM / IP Logged

On a Vats sytem (Buick),there is a resister in the ignition key that makes contact with 2 wires when the key is inserted in the ignition switch,thus disarming the alarm system and allows the car to start,question-if the key is left in the switch in the off posistion, is any power being consumed.?

Back to Top

brcidd

Copper - Posts: 274

Joined: January 07, 2005

Location: Ohio, United States

Posted: January 05, 2008 at 9:32 PM / IP Logged

No power is present until the key is rotated to the ignition "on" position --- Where much power is consumed by other ignition hot components.............

Brcidd - Engineer That Does Remote Starter Installs on the side.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

vats in buick

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.