best bypass module for 06 dodge ram 1500

Hey all, I need to know which bypass module would work best for an 06 Dodge ram 1500. I would like the bypass to do the (-) 2nd start and acc. Basically, I need a module that will do everything for me and know that that module will work. This is the first 06 ram i'm doing and I would like to simplify everything as much as possible. thanks

Actually Theres no know bypass that will do 2nd start , 2nd Acc the module will do everything else , oem alarm,door ping,key bypass , door lock... i use the Pats Chrysler-04 but you will have to mess with the relay by yourself

Check out Idatalink modules.  Used a couple of them with good results.  Should take care of the mux starting system.

so if there is no bypass to do the (-) part for me. How do I measure the mux wire for the correct ohms for the (-) start and acc? Do I ground one of my dmm leads and probe the mux wire with the other and check for ohms. Or do I have to cut the mux wire and place a dmm lead on each end and measuure the ohms when starting and with the acc on? Any help would be really appreciated.

bust4_rhymes wrote: Actually Theres no know bypass that will do 2nd start , 2nd Acc the module will do everything else , oem alarm,door ping,key bypass , door lock... i use the Pats Chrysler-04 but you will have to mess with the relay by yourself

There are plenty of bypasses that give you the mux output to the PURPLE / brown wire. Here is the one I normally use: link.Installer, IT support, and FFL. I need less hobbies.

Check out www.idatalink.ca they have a bypass that will take care of everything including locks, factory alarm, tach and immobilizer bypass. I'm pretty sure the bypass is the ads-al ca and the ads-rng c2.