04 buick rendezvous

Home / the12volt's Install Bay / Car Security and Convenience / 04 buick rendezvous (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ziggyb222

Silver - Posts: 593

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2004

Location: Maine, United States

Posted: January 07, 2008 at 3:13 PM / IP Logged

Put an Ultrastart 1270 in a 04 rendezvous with the crimestopper(ifar) INT-SL module. I could not get the module to program. Tried another one and the same thing happened. I hold the button, plug in the first plug for power, then the second plug making sure it is right side up, then turn the ignition on and wait for it to flash, but it never does. Now using the old GM-SL was a snap... Any ideas why this will not program?

moonliter

Copper - Posts: 322

Joined: February 28, 2007

Location: Canada

Posted: January 07, 2008 at 3:49 PM / IP Logged

did you use datalink connection or non datalink connection ?

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: January 07, 2008 at 4:50 PM / IP Logged

non data link... just like I always hooked up the GM-Sl modules.. those never failed me....

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 07, 2008 at 9:41 PM / IP Logged

You have to HOLD THE PROGRAMMING button down while turning the ignition on. After the LED flashes then release the programming button and start the vehicle.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: January 08, 2008 at 4:36 AM / IP Logged

Yes that is what I did.held the button all the way through.(pain in the butt ha ha ) but could not get the light to flash..

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: January 09, 2008 at 11:15 AM / IP Logged

Any other suggestions? Anyone else run into this problem???

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 09, 2008 at 12:24 PM / IP Logged

Do you have another module to try ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: January 09, 2008 at 12:38 PM / IP Logged

I also tried that.. same thing.. I was wondering if I might have to upgrade the software in it..

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

04 buick rendezvous

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.