2001 ford ranger

Home / the12volt's Install Bay / Car Security and Convenience / 2001 ford ranger (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

1caraudioman

Member - Posts: 33

Joined: February 04, 2005

Location: United States

Posted: January 10, 2008 at 3:25 PM / IP Logged

I put a remote start on my truck i used a dei 556s-w the one with a blank key in it i cant for the life of me get the key to program?? any ideas? thanks chris

Back to Top

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: January 10, 2008 at 6:12 PM / IP Logged

helps to tell us how you're trying to do it

Back to Top

1caraudioman

Member - Posts: 33

Joined: February 04, 2005

Location: United States

Posted: January 10, 2008 at 7:04 PM / IP Logged

well on that bypass u stick one key in the theft light goes out then you do the other key i have done lots of these and cant figger out why its not working?

Back to Top

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: January 10, 2008 at 9:18 PM / IP Logged

so you're powering up the remote start to simulate turning on the ignition the second time in order to program the 556s?

Back to Top

ralphtonka

Member - Posts: 30

Joined: December 20, 2007

Location: Alberta, Canada

Posted: January 10, 2008 at 9:28 PM / IP Logged

start w 1st key, start w 2nd key, place new key in ign then hit rem start (assuming the starter is wired and programmed). then put the key in the bypass and ajust your ring

Back to Top

1caraudioman

Member - Posts: 33

Joined: February 04, 2005

Location: United States

Posted: January 11, 2008 at 7:01 PM / IP Logged

this by pass has a uncut key in it im gonna try to ajust my ring

Back to Top

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: January 11, 2008 at 7:57 PM / IP Logged

rather than trying to program it via the ring, remove the key and hold the key next to the ignition as close as possible to the factory PATS ring when programming

Back to Top

1caraudioman

Member - Posts: 33

Joined: February 04, 2005

Location: United States

Posted: January 11, 2008 at 10:07 PM / IP Logged

well i moved the ring it worked great i have done a ton of fords and never had to move the ring ?guess theirs a first time for everything thanks for your input guys.chris

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 ford ranger

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.