2005 equinox xk06 pkg7

Home / the12volt's Install Bay / Car Security and Convenience / 2005 equinox xk06 pkg7 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

avenger2008

Member - Posts: 2

Joined: January 16, 2008

Location: Massachusetts, United States

Posted: January 16, 2008 at 4:23 PM / IP Logged

I have a XK06 PKG7 Bypass Module Platform #06.

Vehicle a 2005 Chevy Equinox.

Passlock Sensor Connector 3-way BK:

Pin A OG/WH_812__12-Volt Reference.

Pin B OG/BK_1057__Sensor Low Reference.

Pin C YE_1836__Security System Sensor Signal.

XK06 Pin 1 Brown Wire connected to RS Ground when running.

XK06 Pin 2 Green Wire connected to key Ignition side, yellow wire 1836.

XK06 Pin 3 Blue Wire connected to BCM side, yellow wire 1836.

XK06 Pin 4 Violet/White, Instructions unclear which wire on the Equinox to connect to.

XK06 Pin 5 Violet Wire, Tee'ed to OG/BK wire 1057.

XK06 Pin 6 Pink/White Wire Not used ?

XK06 Pin 7 Pink Wire Not used ?

XK07 Pin 8 Orange Wire to RS Start.

XK06 Pin 9 Red, Instructions unclear which wire on the Equinox to connect to.

XK06 Pin 10 Black to Chassis Ground

http://xpressdownload.com/getdocument.aspx?documentid=420 instructions show different connectors and wires than for the Equinox.

Has anyone connected a XK06 to a 2005 Equinox ?

tc

Back to Top

chadwa2003

Copper - Posts: 353

Joined: January 08, 2005

Location: Canada

Posted: January 16, 2008 at 7:41 PM / IP Logged

Hey you are folowing the wrong diagram and using the wrong firmware. You need to use plxr version 1.0 Here is the install manual that you should be following.

http://www.bypasskit.com/getdocument.aspx?documentid=673

Back to Top

robertsc

Copper - Posts: 337

Joined: December 21, 2007

Location: Ontario, Canada

Posted: January 16, 2008 at 7:44 PM / IP Logged

i've had problems with the non starter wire bypasses from bypasskits

equinoxes and canyons

and found that the fortin passlock sl are more reliable

Back to Top

avenger2008

Member - Posts: 2

Joined: January 16, 2008

Location: Massachusetts, United States

Posted: January 18, 2008 at 11:55 AM / IP Logged

Hey chadwa2003,

Thanks for slapping me back of the head. One of those days, thinking one thing, looking at it as something else.

Reflashed the XK06 to PLXR v1.02, and rewired to the correct drawing.

Works as its suppose to, Thanks for the input. 2005 equinox xk06 pkg7 -- posted image.

tc

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2005 equinox xk06 pkg7

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.