1996 jetta alarm wiring

Home / the12volt's Install Bay / Car Security and Convenience / 1996 jetta alarm wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

Next Page > < Prev Topic Next Topic >

over_boost

Member - Posts: 16

Joined: January 30, 2008

Location: Alberta, Canada

Posted: January 30, 2008 at 1:47 PM / IP Logged

hi guys, i was just wondering if i can connect the arm and disarm wire to the lock and unlock relay? they both have a positive trigger. Disarm would require a single pulse and unlock would require a double pulse.

Thank you.

Back to Top

audioman2007

Copper - Posts: 580

Joined: February 20, 2007

Location: United States

Posted: January 30, 2008 at 2:36 PM / IP Logged

That is correct BUT if your alarm can be programed for double pulse, then you wont need a relay

Back to Top

over_boost

Member - Posts: 16

Joined: January 30, 2008

Location: Alberta, Canada

Posted: January 30, 2008 at 2:37 PM / IP Logged

Hi guys i have a 5 speed Jetta, i have found most of the wires, i just need to know where i can get the wire for the parking brake and the polarity of it.

Thank you.

Back to Top

over_boost

Member - Posts: 16

Joined: January 30, 2008

Location: Alberta, Canada

Posted: January 30, 2008 at 3:14 PM / IP Logged

oh ok , but the alarms output is a (-) and the vehicle lock is (+)

Back to Top

audioman2007

Copper - Posts: 580

Joined: February 20, 2007

Location: United States

Posted: January 30, 2008 at 3:15 PM / IP Logged

use a relay to convert the polarity.

Back to Top

over_boost

Member - Posts: 16

Joined: January 30, 2008

Location: Alberta, Canada

Posted: January 30, 2008 at 3:22 PM / IP Logged

sounds good, thanks for the info.

Back to Top

over_boost

Member - Posts: 16

Joined: January 30, 2008

Location: Alberta, Canada

Posted: January 30, 2008 at 3:27 PM / IP Logged

hey, does anyone know the location of the hand brake wire is? and what is the polarity on it?

Thanks

Back to Top

audioman2007

Copper - Posts: 580

Joined: February 20, 2007

Location: United States

Posted: January 30, 2008 at 5:22 PM / IP Logged

What would you need that wire for?

Back to Top

flobee4

Silver - Posts: 585

Joined: January 02, 2004

Location: United States

Posted: January 31, 2008 at 12:18 AM / IP Logged

parking brake: BROWN / Yellow (-) at relay 173, on the back side of the relay bank.

Back to Top

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 31, 2008 at 6:48 AM / IP Logged

are you installing a remote start? or an alarm? because i havent seen an alarm that asks for a handbrake connection.

Back to Top

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.