vw beetle door locks

Home / the12volt's Install Bay / Car Security and Convenience / vw beetle door locks (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

3kgtfreak

Member - Posts: 4

Joined: February 11, 2008

Location: California, United States

Posted: February 11, 2008 at 7:09 PM / IP Logged

I have a 2000 Beetle 1.8T but cant find the door lock and unlock wires. the12volt says at switch but on the door lock switch there isnt any color there refering to? also what is a double pulse?

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: February 11, 2008 at 8:46 PM / IP Logged

yellow/blue, WHITE/ lt.green.

lock... unlock. all the way towards the rear of the door. Not at the front. break the harness open where it goes into the door thru a rubber grommet.

Back to Top

3kgtfreak

Member - Posts: 4

Joined: February 11, 2008

Location: California, United States

Posted: February 11, 2008 at 8:57 PM / IP Logged

so i dont get it from the door switch?

Back to Top

chadwa2003

Copper - Posts: 353

Joined: January 08, 2005

Location: Canada

Posted: February 11, 2008 at 9:42 PM / IP Logged

No the wiring you want is actually from the key cylinder

Back to Top

3kgtfreak

Member - Posts: 4

Joined: February 11, 2008

Location: California, United States

Posted: February 11, 2008 at 10:00 PM / IP Logged

ok i found them but this is the thing. the wires read 12v but when i turn the key in one direction the 12v signal goes to ground. how do i wire the door locks? sorry for such a nob question but Im new to car alarm

Back to Top

chadwa2003

Copper - Posts: 353

Joined: January 08, 2005

Location: Canada

Posted: February 11, 2008 at 10:20 PM / IP Logged

The door lock wires in your car a negative trigger so you should be fine to just to wire them directly to your alarm. What system are you installing?

Back to Top

3kgtfreak

Member - Posts: 4

Joined: February 11, 2008

Location: California, United States

Posted: February 11, 2008 at 11:05 PM / IP Logged

ok i got it. the alarm im using has two different ways to set up the door locks. i needed to use the (-) pulses to make the doors work.(just like 12v said) vw beetle door locks -- posted image.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

vw beetle door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.