2000 ford windstar, remote start

Hi there..

I want to install remote starter in 2000 Ford Windstar, the only problem I have is this van has 3 ignitions the remote starter that have only 2 ignitions, how can I install this unit, someone told me to use relay but I not sure how to wire it

Can anyone help me with it

Thanks

this is what i have listed off my wiring charts

	Ignition 1		WHITE/ YELLOW		(+)		IGNITION SWITCH HARNESS
	Ignition 2		VIOLET/ORANGE		(+)		IGNITION SWITCH HARNESS
	Accessory 1		VIOLET/ORANGE		(+)		IGNITION SWITCH HARNESS
	Accessory 2		YELLOW		(+)		IGNITION SWITCH HARNESS
	Accessory 3		BLACK/ GREEN		(+)		IGNITION SWITCH HARNESS

test your wires, sometimes wiring charts are wrong.

to wire up an additional ignition with a relay, look on your unit and look for an optional (-) 250 - 500mA output for ignition or programmable output and wire it to a relay like so

85 - optional (-) output from unit