how do i add a dei 508d

Home / the12volt's Install Bay / Car Security and Convenience / how do i add a dei 508d (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

davesparkave

Member - Posts: 15

Joined: February 18, 2008

Location: Pennsylvania, United States

Posted: February 24, 2008 at 11:41 AM / IP Logged

can i tap into the wires on my shock sensor they are the same colors on both sensors,will that affect the shock sensor if i do this?

Back to Top

novice tech

Member - Posts: 7

Joined: February 02, 2008

Location: Trinidad and Tobago

Posted: February 25, 2008 at 7:17 AM / IP Logged

hey u can check in a viper 791xv manual on pg.32 and this will show u how to correctly interface your 508d with shock sensor.

Back to Top

chris27

Member - Posts: 41

Joined: November 19, 2007

Location: Texas, United States

Posted: February 25, 2008 at 2:51 PM / IP Logged

You can tap the blue and green in together but you really want to ground it where you grounded the alarm and get 12V from your constant power line, not from the shock sensor.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how do i add a dei 508d

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.