529t controlled duration with 562t

Home / the12volt's Install Bay / Car Security and Convenience / 529t controlled duration with 562t (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tjetzer

Member - Posts: 6

Joined: October 02, 2004

Posted: March 13, 2008 at 11:47 AM / IP Logged

Is it possible to do controlled duration in both directions (One motor, up and down) with a 562T remote start? If so, which wires off the 562T would be used?

Thanks

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 13, 2008 at 1:11 PM / IP Logged

Just looked on directechs couldn't find a 562t what brand is it ? Viper Hornet etc? The leads you want on the 529t are the grey and grey /black

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 13, 2008 at 1:18 PM / IP Logged

Have you got a violet/black and WHITE/ black channel 4 & 5 outputs? You can use these to send window up and down. Look at 529t instructions, cut up feed and down feed to motor and follow the colours accordingly.

tjetzer

Member - Posts: 6

Joined: October 02, 2004

Posted: March 13, 2008 at 2:26 PM / IP Logged

Howie,

Thanks for the reply. It's a Valet 562T. It does not have a 5th output, only a 4th.

Here is the real issue I'm having. The 529T is not going to be controlling a window, it will be controlling the power trim on a boat. The only real change in resistance/current draw would be when the tim hits a certain point and changes from a fast ascent/descent to a slow ascent/descent. I would prefer the controlled duration so the trim can be controlled at all times rather than have full up/down.

Do you have any suggestions?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 13, 2008 at 2:58 PM / IP Logged

orry I jumped in before, ignore the grey and grey/black, use orange and and orange back, are you using the the red white on the 562t?

tjetzer

Member - Posts: 6

Joined: October 02, 2004

Posted: March 13, 2008 at 4:22 PM / IP Logged

I haven't installed anything yet. The red black wire will not be used for anything. I assume that wire is controlled by the "AUX" on the remote, then I could use the Channel 4 wire for the other validity channel. This would then give me controlled duration, correct?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

529t controlled duration with 562t

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.