97 Yukon SLT

Home / the12volt's Install Bay / Car Security and Convenience / 97 Yukon SLT (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

almo

Member - Posts: 12

Joined: November 04, 2002

Location: United States

Posted: March 03, 2003 at 1:30 PM / IP Logged

Hello Everyone,

I have been able to find the wiring diagram for my truck through other threads. What I haven’t found are the resistor values for the positive door locks and how they should be wired through the relays. Any help would be greatly appreciated.

Capt. Al

Haku

Copper - Posts: 204

Joined: November 22, 2002

Location: United States

Posted: March 03, 2003 at 2:38 PM / IP Logged

Four door versions are positve trigger for doors, no resistor needed. Two door models are 5-wire locks, with no resistor needed. Is your a two of four door model, also what is the output from your alarm for the locks.?? Postive or Negative..

Hak

Siemens Autostart

almo

Member - Posts: 12

Joined: November 04, 2002

Location: United States

Posted: March 03, 2003 at 4:03 PM / IP Logged

I have the four door model Yukon and I will most likely be using the UNGO KE106. I used this model before on a stratus with positive door locks and because it was a single wire door I had to use resistors.

I just realized the Yukon has two wires.

The Ungo has 5 wires for the door lock harness thay are:

WHITE/ Black: Lock #87A (Normally Closed)

GREEN/ Black: Lock #30 (Common)

Blue/Black: Unlock #30 (Common)

BROWN / Black: Unlock #87A (Normally Closed)

Violet/Black: Lock/Unlock #87 (Normally Open) [10A fused]

How should I wire them up?

almo

Member - Posts: 12

Joined: November 04, 2002

Location: United States

Posted: March 04, 2003 at 9:39 AM / IP Logged

Thanks For the info. I'll take a look this weekend!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

97 Yukon SLT

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.