ground when armed output

Home / the12volt's Install Bay / Car Security and Convenience / ground when armed output (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

davesparkave

Member - Posts: 15

Joined: February 18, 2008

Location: Pennsylvania, United States

Posted: March 30, 2008 at 8:01 PM / IP Logged

i know what its used for i already have a electroluminescemt armed indicator hooked up to it,,,but i want to know which way to hook up the diode so that i can attach my orange wire from my t360 tilt sensor up to my alarm?

spookiestylez

Silver - Posts: 531

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2005

Location: Virginia, United States

Posted: March 30, 2008 at 9:54 PM / IP Logged

https://www.the12volt.com/diodes/diodes.asp

rtfm

KPierson

Platinum - Posts: 3,527

This member consistently provides reliable information

Joined: April 14, 2005

Location: Ohio, United States

Posted: March 30, 2008 at 10:00 PM / IP Logged

The output is ground, so if you want to isolate two devices you would want the stripes on each diode to closest to the alarm unit (facing away from the sensors/devices).

Kevin Pierson

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ground when armed output

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.