viper 5900 failsafe starter kill

Home / the12volt's Install Bay / Car Security and Convenience / viper 5900 failsafe starter kill (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

matrixlu21

Member - Posts: 22

Joined: March 08, 2008

Posted: April 06, 2008 at 3:05 AM / IP Logged

is it better to install theFailsafe Starter Kill feature that comes with the viper 5900 or not?

does anti-grind only work if Failsafe Starter Kill is installed?

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: April 06, 2008 at 10:04 PM / IP Logged

I'm not sure what you mean...the manual I'm looking at for the 5900 says that the starter kill is built in to the XCRS relay pack. Do you have a separate relay with yours?

Anti-grind should work with the relay pack alone provided that it's set to on in the feature programming, and the starter wire is cut and connected properly to the relay pack.

C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two

Search for other posts by chriswallace187

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5900 failsafe starter kill

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.