550hf clear / reset transmitters?

Home / the12volt's Install Bay / Car Security and Convenience / 550hf clear / reset transmitters? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ziesemer

Member - Posts: 1

Joined: June 02, 2008

Posted: June 02, 2008 at 7:38 PM / IP Logged

Thanks to some other links on this site, I finally found both the owner's guide and the installation guide for the 550HF.

(The installation guide I'm referencing is named "N550HF.pdf" but is titled "553 Series Installation Guide".)

Neither seem to indicate how to clear / reset all programmed transmitters / remotes. Any ideas?

I had one slightly working remote (buttons going bad). I just bought 2 replacements. I was able to program one but not the other. I'm thinking only 2 remotes are programmable per system on this model? Assuming so, I'm thinking that I need to clear/reset the existing remotes to get the 2 new ones to work.

Thanks!

Back to Top

Big Dog

Gold - Posts: 1,265

This member consistently provides reliable information

Joined: May 02, 2002

Location: Quebec, Canada

Posted: June 03, 2008 at 9:24 AM / IP Logged

Does your module have a small sliding door under which there are 4 dip switches and two jumpers? If so use this.

One jumper is light flash polarity the other is TX learn. Don't forget to place the jumper into the learn position. You'll see a small "L" printed on the PCB.

It accepts up to 4 transmitters. Adding a fifth bumps out the first, etc.

Prepare your future. It wasn't the lack of stones that killed the stone age.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

550hf clear / reset transmitters?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.