727t with a remote start

When installing a Hornet 727T with a remote start  Valet 561T, How can I defeat the alram?

Will this work with the Yellow wire (h1/9)? Or is there another way of doing this?

Thanks,

Kurt

Remove the H1/9 of the 727 from ignition and connect it to the H1/3 of the 561T.

Also, the H2/5 gray wire of the 727T will need a positive input in order to shunt the on-board shock sensor. Use the status output wire of the 561T to drive a relay which inverses the polarity to a positive going signal to the gray H2/5.