2008.5 mazda3, prostart ct-5010

Home / the12volt's Install Bay / Car Security and Convenience / 2008.5 mazda3, prostart ct-5010 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

carthings

Member - Posts: 10

Joined: June 01, 2008

Posted: July 22, 2008 at 11:13 PM / IP Logged

Hi I am trying to hookup the alarm so that when the car is started I can use another output to activate the rear/mirror defrost. The alarm is a Prostart CT-5010. I should also mention the only aux I have left is a "constant while two buttons are held down" or "push once and will stay active for 30 seconds then shut off". Is this possible? And is the best place for me to tap into the defrost behind the switch itself? I was thinking that I could just hook into the wire behind the swtich and then use the aux where it is active while you hold it, then I could quickly push and let go of the two buttons and would that not then just be like pushing the defrost switch quickly which will turn it on and put it on the defualt timer? Also if I could set this up so that that option will only work when the car is started that would be ideal as well.

Thanks in advance everyone.

carthings

Member - Posts: 10

Joined: June 01, 2008

Posted: July 22, 2008 at 11:20 PM / IP Logged

Hello Everyone,

I hooked up the Prostart CT-5010 and I got everything to work properly except for the rear defrost and the parking lights. I have it hooked up to the parking lights correctly however I noticed that the parking lights are actually a different set of lights that the lights that are used for the factory keyless entry. The parking lights option flashes a dimmer flash of the orange lights in the front and the red lights in the back and the little orange side markers do nothing, I should note the guage and stereo lights also flash at the same time with the parking lights (I am assuming this is normal). The factory keyless entry does not flash anything inside the car and flashes a brighter flash of the two orange lights in the front and two orange lights in the back and the two orange side markers on the car (looks way better). If possible I would like to tap into this and use it instead of the parking lights wire. I think they are the same lights that are on when the 4way emergency flashers are on. If this is possible which wire would I tap into and would it be a pos or neg system?

Thanks again in advance everyone.

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: July 23, 2008 at 1:01 AM / IP Logged

There is a BLACK/ green behind the radio that will require a negative pulse (one second) to trigger the rear defrost.

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: July 23, 2008 at 1:03 AM / IP Logged

Parking light trigger is negative BLACK/ white at the switch harness.

carthings

Member - Posts: 10

Joined: June 01, 2008

Posted: July 24, 2008 at 5:23 PM / IP Logged

Thanks for the info on the defrost. As for the parking lights I did find the actual parking lights wire but I am looking for the system that is being used by the factory keyless entry which is not the parking lights, I believe it is the 4way flashers? Any ideas?

carthings

Member - Posts: 10

Joined: June 01, 2008

Posted: July 24, 2008 at 5:25 PM / IP Logged

Also how would i wire it up so the defrost option will only work when the car is started and not all the time?

carthings

Member - Posts: 10

Joined: June 01, 2008

Posted: July 25, 2008 at 12:09 AM / IP Logged

anyone?

carthings

Member - Posts: 10

Joined: June 01, 2008

Posted: July 25, 2008 at 7:01 PM / IP Logged

Anyone? I really need to know the answer to my last two questions so I can complete the install, any help would be greatly appriciated.....

Thanks again.

carthings

Member - Posts: 10

Joined: June 01, 2008

Posted: July 26, 2008 at 1:55 PM / IP Logged

To hook something up so that it only works while the car is started isnt there a ground while running wire? I am correct in my thinking about what this wire is used for?

carthings

Member - Posts: 10

Joined: June 01, 2008

Posted: July 29, 2008 at 2:04 PM / IP Logged

I have verified for sure the lights that are flashing are the 4way hazard flashers when you lock/unlock the factory keyless entry system, so does anyone know how I would tap into the 4way flashers with my alarm instead of using the parking lights?

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.