infinity g20 disarm and rearm wires

Home / the12volt's Install Bay / Car Security and Convenience / infinity g20 disarm and rearm wires (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rt4x4

Copper - Posts: 107

Joined: November 28, 2006

Posted: July 26, 2008 at 7:52 PM / IP Logged

Could someone tell how to wire the alarm disarm and rearm wires using a viper 571xv in a 2000 infinity G20

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: July 26, 2008 at 8:35 PM / IP Logged

Door Lock	Yellow (-)	Module left of Steering Column
Door Unlock	Light GREEN/ Red (-)	Module left of Steering Column

This info is off of the Vehicle Wiring Database on this site. The info on the Audiovox site names these 2 wires as factory arm and disarm. They also say that lock and unlock arms and disarms the factory alarm. You would need to connect the unlock wire of your alarm to the light GREEN/ red wire and connect the lock wire from your alarm to the yellow wire.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

infinity g20 disarm and rearm wires

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.