the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

subaru not starting


Post ReplyPost New Topic
< Prev Topic Next Topic >
lindsley 
Member - Posts: 2
Member spacespace
Joined: August 01, 2008
Location: Saint Lucia
Posted: August 01, 2008 at 2:56 PM / IP Logged  

Its a 2006 Suburu Impreza which was bought from Insurance because of water damage.

History

The ECU was changed and the car is not starting, Carried out a diagnostic test and the results are listed here.

Will start if Fuel is added to the intake, TACH will not work

Fuel pump is not working, neither is the Injectors.

The Key can be used to lock and unlock the car.

I am of the opinion that there is some unit the immobilizes the Car. The Local dealer on the Island is of very little help as they cannot solve the problem. Sourced the computer from another dealer outside of the country.

I got the replaced ECU from the local dealer but its damage.

Is there any way I can Bypass the Immobilizer Circuit, if not can I use an after market unit to get this car rolling again?

Thanks for your response

Regards

Lindsley

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: August 01, 2008 at 8:32 PM / IP Logged  
If you don't have the original key for the cylinder and anti theft, then your out of luck unless you want to get a new key cut and programmed at the Subaru dealership by giving them your VIN. If the ECM/BCM was damaged, you also may have damage to your anti theft module as well causing your no start problem.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
lindsley 
Member - Posts: 2
Member spacespace
Joined: August 01, 2008
Location: Saint Lucia
Posted: August 01, 2008 at 9:21 PM / IP Logged  
Thanks for the response.
I have the original keys and everything else is stock. All that was changed was the ECU (the control brain)as it got damage. Water remained in there and messed up some of the components.
Regards
Lindsley

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 12, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer