07 aveo, viper 160xv

Home / the12volt's Install Bay / Car Security and Convenience / 07 aveo, viper 160xv (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bullpar

Member - Posts: 36

Joined: October 25, 2006

Location: United States

Posted: August 22, 2008 at 7:20 PM / IP Logged

I have an 07 Aveo Hatchback and have installed a 160XV. My car has the transponder system installed. I got a diag code of (+/-) shutdown. What does this mean? Also I connected wires for the lock/unlock into the relay under the passenger kickpanel. But it does nothing. And finally when I got to crank it remotly it does nothing. any ideas. Thank you all so much

bullpar

Member - Posts: 36

Joined: October 25, 2006

Location: United States

Posted: August 23, 2008 at 7:23 AM / IP Logged

Nobody knows anything about the aveo...

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: August 23, 2008 at 9:45 AM / IP Logged

i'm sure lots do... and with a bit more info on your part might be able to help.... what bypass module did you use? did it program successfully? what wires did you tap into for keyless? etc. etc.....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

bullpar

Member - Posts: 36

Joined: October 25, 2006

Location: United States

Posted: August 23, 2008 at 10:58 AM / IP Logged

Thank you for replying, I got everything to work except for the lock/unlock. I'm not sure where to hook into. I connected to the central door lock box on the RH side of the car but that doesnt work. I can hear relays under the center console. on that box (under the e-brake handle) it says its the alarm but there is a small antenna coming out of it. I have a feeling thats where i need to hook into. But which wires. Whats strange is My car has the transponder key system but the 160xv will crank the car without a key anywhere near it. Thanks for your help

bullpar

Member - Posts: 36

Joined: October 25, 2006

Location: United States

Posted: September 29, 2008 at 9:26 AM / IP Logged

Hello, I wired a Viper 160xv into my 07 aveo hatchback. I have connected everything except the door locks. I went to the door module on the rh kickpanle like the diagram states but it doesnt work. I do have the transponder system in mine. Where exactly do I connect for the dorrs lock/unlock and the alarm disarm. Whats wierd is I can unlock my car with the original keys and then use the remote start to start it. but if the car is locked the alarm will go off and wont start. I would love to use the viper door lock/unlock because of the range.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 29, 2008 at 12:38 PM / IP Logged

Hello again, what's an Aveo (I'm serious it's not sold here), if you know look it up on vehicle wiring on this site. Should give you your answer.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 29, 2008 at 1:12 PM / IP Logged

Wrong, it's sold here US models, Aveo Lock Lt. Blue, Unlock White; disarm factory alarm BROWN / blue or purple, all in RKE (Keyless entry module) in centre console adjacent to parking brake.

Aveo5 Lock grey, unlock lt. green; at factory lock module, passenger kickwell; disarm factory alarm,dark blue in driver's door loom. All neg going, i.e. ground each to get the result.

bullpar

Member - Posts: 36

Joined: October 25, 2006

Location: United States

Posted: September 29, 2008 at 1:48 PM / IP Logged

Awsome thank you very much. I was looking around and had seen the module just forward of the emerg. brake handle but havent had time to look any further into it.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

07 aveo, viper 160xv

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.