Clifford Concept 50, How to Program Fob?

Home / the12volt's Install Bay / Car Security and Convenience / Clifford Concept 50, How to Program Fob? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

diddy dan

Member - Posts: 4

Joined: September 03, 2008

Posted: September 03, 2008 at 7:36 PM / IP Logged

Hi,

Just bought an old 1994 Mazda Eunos with a Clifford Concept 50 that was installed here in the UK in June 1999 when the car was imported.

I've also bought a spare remote (FCC ID. CZ57RRTX12R) but need some advice or a set of instructions on how to program it to my system. I have the original user guide but there isn't any info on programming new fobs in it so please could someone help?

Thanks & regards,

Dan.

Back to Top

spookiestylez

Silver - Posts: 531

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2005

Location: Virginia, United States

Posted: September 03, 2008 at 10:50 PM / IP Logged

concept50x_owners.pdf

page 18 is for transmitters

rtfm

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 04, 2008 at 12:29 PM / IP Logged

There was the 50 and the 50X with completely different programming. Your best bet now would be to contact the new UK distributors, Armour Automotive and get owner manuals for each. Frankly I used to come across one of these each week and the only recourse because of it's age etc. was to bin them.

Back to Top

diddy dan

Member - Posts: 4

Joined: September 03, 2008

Posted: September 04, 2008 at 12:51 PM / IP Logged

Thanks for the 50x user manual Spookie..... however if as you say Howie the 50 and 50x are completely different in terms of fob programming then the user manuals alone aren't going to be any help as it's definitely the 50 I have along with an original user manual and there's nothing about programming fobs in there.

Would an installation manual for a Concept 50 perhaps contain the info I need? If so can anyone out there help me out.

Thanks for the responses so far please keep em coming

Dan.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 04, 2008 at 1:07 PM / IP Logged

You need to know your original valet code!

Back to Top

diddy dan

Member - Posts: 4

Joined: September 03, 2008

Posted: September 09, 2008 at 4:05 PM / IP Logged

Thanks howie; I have the original valet code but think I need a concept 50x instalation manual..... can anyone help please?

Back to Top

OmarR

Copper - Posts: 162

Joined: April 02, 2003

Location: Indiana, United States

Posted: September 09, 2008 at 7:27 PM / IP Logged

http://www.guardianalarms.net/home_security_manuals/home-security-manuals-clifford-electronics.htm

Back to Top

diddy dan

Member - Posts: 4

Joined: September 03, 2008

Posted: September 10, 2008 at 6:09 PM / IP Logged

Thanks OmarR thats just the ticket and thanks to everyone else who's also helped me out!

Dan Clifford Concept 50, How to Program Fob? -- posted image.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford Concept 50, How to Program Fob?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.