the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

directfax document 1083


Post ReplyPost New Topic
< Prev Topic Next Topic >
adaseb 
Member - Posts: 16
Member spacespace
Joined: September 21, 2008
Posted: September 22, 2008 at 7:35 PM / IP Logged  

Does anyone have this document handy that you can PM me or post the link?

adaseb 
Member - Posts: 16
Member spacespace
Joined: September 21, 2008
Posted: September 22, 2008 at 8:05 PM / IP Logged  

And also Document 1082 I need.

Thanks in advance.

chriswallace187 
Gold - Posts: 1,661
Gold spacespace
Joined: March 11, 2002
Location: Pennsylvania, United States
Posted: September 23, 2008 at 1:45 AM / IP Logged  
1082 is in the Downloads section of this site; click the link at the top of the page and search for it.
I don't have access to 1083 but if you could post the sentence from DEI's tech info that mentions it I can probably draw the equivalent from memory.
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two
chriswallace187 
Gold - Posts: 1,661
Gold spacespace
Joined: March 11, 2002
Location: Pennsylvania, United States
Posted: September 23, 2008 at 1:48 AM / IP Logged  
Better yet, check this post here. It helps to search first.
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two
adaseb 
Member - Posts: 16
Member spacespace
Joined: September 21, 2008
Posted: September 23, 2008 at 2:06 AM / IP Logged  

Its seem that the procedure is different from what I was originally supplied with.

With that document for the Chrysler Second Start it states to cut the PURPLE / Brown wire and attach to the 87a and 30 connectors with 87a going to a 180Ohm ground.

My originally instructions where to connect

85 to Starter wire output

86 to Ground When Running output
87  to 180Ohm resistor in series with a connection to the multiplexed second starter
87a blank
30 ground.

Which ones are correct?

adaseb 
Member - Posts: 16
Member spacespace
Joined: September 21, 2008
Posted: September 23, 2008 at 2:23 AM / IP Logged  

Here is a picture of the original instructions that I was given.

directfax document 1083 -- posted image.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 17, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer