command start issues

Home / the12volt's Install Bay / Car Security and Convenience / command start issues (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rbhazard

Member - Posts: 2

Joined: October 19, 2008

Location: British Columbia, Canada

Posted: October 19, 2008 at 3:03 PM / IP Logged

I have a 1998 pontiac sunfire with a command start cs310i

does anyone have a programming manual for it, also where might I find a new key fob?, I just bought the car

thanks

rbhazard

Back to Top

rbhazard

Member - Posts: 2

Joined: October 19, 2008

Location: British Columbia, Canada

Posted: October 19, 2008 at 3:51 PM / IP Logged

sorry, I forgot to add that I am considering replacing it with a 580i TW and am wondering if the wiring harnesses are interchangeable.

The 580 comes with an alarm and the 380 does not. will this affect anything with the original wiring that was done to install the 380?

rbhazard

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

command start issues

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.