2008 silverado, autopage remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2008 silverado, autopage remote start (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

gixxerboyz

Member - Posts: 14

Joined: December 04, 2007

Location: Illinois, United States

Posted: November 16, 2008 at 8:55 PM / IP Logged

i just did a remote start on an 08 using an AutoPage rs and DEI 1701G module. i had to use a relay and add a couple resistors. it seemed to work just fine, now the next day it will not start. it cycles like it should but never cranks. everything else works fine, door locks etc, starts with the key no problem there. HELP!! im stuck. i used the wiring diagram from this website and followed it. what am i doing wrong??

gixxerboyz

Member - Posts: 14

Joined: December 04, 2007

Location: Illinois, United States

Posted: November 17, 2008 at 5:43 PM / IP Logged

so now this morning it worked. what is going on????

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: November 17, 2008 at 6:44 PM / IP Logged

My first thought is the resister value on the starter wire is incorrect....

Mike M2

Tech Manager

CS Dealer Services

gixxerboyz

Member - Posts: 14

Joined: December 04, 2007

Location: Illinois, United States

Posted: November 17, 2008 at 8:22 PM / IP Logged

what watts should the resistors be?? 1/4,1/2 or 1 watt??

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: November 17, 2008 at 9:24 PM / IP Logged

Wattage is unimportant in this application. The Ohm value is what you need correct, which is 1280....

Mike M2

Tech Manager

CS Dealer Services

gixxerboyz

Member - Posts: 14

Joined: December 04, 2007

Location: Illinois, United States

Posted: November 17, 2008 at 9:26 PM / IP Logged

Mike M2 wrote:

Wattage is unimportant in this application. The Ohm value is what you need correct, which is 1280....

it called for 9.6k and 6.3k, i used 1/4 watt resistors

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: November 18, 2008 at 6:36 AM / IP Logged

Sorry, forgot you are using a 1701G and the directions it comes with, they call for 9.6 on the start and 6.3 on the accessory. Avox has another method using just one resistor at 1280.

If you are not using the correct value(say you are off 10% or more) it will do what you describe. The 1/4 resistors are fine...

Mike M2

Tech Manager

CS Dealer Services

soundnsecurity

Gold - Posts: 2,711

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 10, 2008

Location: Louisiana, United States

Posted: November 18, 2008 at 5:27 PM / IP Logged

check for loose connections

Search for other posts by soundnsecurity

harlin

Member - Posts: 2

Joined: January 22, 2009

Location: Wisconsin, United States

Posted: January 24, 2009 at 12:23 PM / IP Logged

autopage either remote wont work after starting car but lcd beeps when run time done

any ideas?????????

harlin

Member - Posts: 2

Joined: January 22, 2009

Location: Wisconsin, United States

Posted: January 24, 2009 at 12:26 PM / IP Logged

harlin wrote:

autopage either remote wont work after starting car but lcd beeps when run time done

any ideas?

sorry posted in wrong spot...

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.