avital 4103 with 1700g

Home / the12volt's Install Bay / Car Security and Convenience / avital 4103 with 1700g (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

justaguy48187

Member - Posts: 3

Joined: November 23, 2008

Location: Michigan, United States

Posted: November 23, 2008 at 8:27 PM / IP Logged

Hello I am working on an 2002 gmc envoy sle

I hooked up remote start last night, It worked fine, this morning I had a dead battery, jumped truck and now remote start does not work, help please

1700g wiring as follows

red to red on ignition switch

Black to Ground

GREEN/ black to green on door lock wire harness on 4103

light blue to blue door lock harness on 4103

blue to blue/white on H2 remote start harness, I had it to orange (ground when locked) Is that why my battery when dead?

purple to obd connector (soldered)

all other wires unused

On avital 4103 heavy gage relay

red to red @ ignition switch

red to RED / white

pink to pink

purple to yellow

orange to orange

pink/white to white

4 pin salellite harness NOT USED

door lock harness

green to GREEN/ black on 1700g

blue to light blue on 1700g

H2 remote harness

BLACK/ white to ground

brown to brake light switch

blue/white to status wire on 1700g

violet/white and gray NOT used

Primary harness H1

black to ground

brown (-) horn output to + parking light brown wire in left kick panel (why I have know idea) I have sense cut that wire so only wire I am using in that harness is the black one.

The led on 1700g comes on when I push the program button, but zero lights come on, on the 4103 avital do you think I burned up the control unit or is there a way to reset the unit after battery failure, plaese help

Thanks in advance dan

justaguy48187

Member - Posts: 3

Joined: November 23, 2008

Location: Michigan, United States

Posted: November 24, 2008 at 4:22 AM / IP Logged

Any ideas Gentlemen?

Dan

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: November 24, 2008 at 9:50 AM / IP Logged

did you reprogram the 1700g after jumping the vehicle?

justaguy48187

Member - Posts: 3

Joined: November 23, 2008

Location: Michigan, United States

Posted: November 24, 2008 at 10:35 AM / IP Logged

Yes, thank you. red led is on and blinks twice, which is what I need it to do.

Dan

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

avital 4103 with 1700g

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.