the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

ignition locking


Post ReplyPost New Topic
< Prev Topic Next Topic >
Cherokee95 
Member - Posts: 18
Member spacespace
Joined: March 14, 2003
Location: United States
Posted: March 15, 2003 at 4:08 PM / IP Logged  
my alarm says if i program it then when i turn the key to ignition the doors will lock, and when i remove the key they will unlock.  I programmed it, however the door do not lock when i turn the ignition, the doors do unlock when i remove the key.  If you have any idea on what is going on can you please help. 
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: March 15, 2003 at 4:54 PM / IP Logged  
do you have the right door wire hooked up? its a neg door trigger. the wire is yellow. most alarm wont lock the doors if the domelight is on. try it with the doors closed and then turn the key on slow to see what happens.
good luck,
david
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Cherokee95 
Member - Posts: 18
Member spacespace
Joined: March 14, 2003
Location: United States
Posted: March 15, 2003 at 5:08 PM / IP Logged  
i got a doorlock converter to convert the locks from neg to pos. 
Cherokee95 
Member - Posts: 18
Member spacespace
Joined: March 14, 2003
Location: United States
Posted: March 15, 2003 at 5:16 PM / IP Logged  
everything works fine the locks open and close fine except for locking with ignition
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: March 15, 2003 at 5:21 PM / IP Logged  
did you double check the programing?is there a delay on your domelight??if so, sit inside the car and wait til the lights goes out and then try turning the key and see what happens.
Cherokee95 
Member - Posts: 18
Member spacespace
Joined: March 14, 2003
Location: United States
Posted: March 15, 2003 at 5:51 PM / IP Logged  
i didnt connect the domelight to the alarm unit, and i programmed the thing the way it said

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 17, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer