Remote start neon.

Home / the12volt's Install Bay / Car Security and Convenience / Remote start neon. (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Edicius

Copper - Posts: 90

Joined: March 11, 2003

Location: Georgia, United States

Posted: March 15, 2003 at 9:57 PM / IP Logged

I want to add neon tubes underneath my car, but I only want them to come on when I remote start my car with my alarm and then once I start driving I want them to turn off. Is this possible.

Thanks

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: March 16, 2003 at 8:46 AM / IP Logged

Wire them through a relay using the second ign output for the remote start as a trigger.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Edicius

Copper - Posts: 90

Joined: March 11, 2003

Location: Georgia, United States

Posted: March 16, 2003 at 6:17 PM / IP Logged

If I do it that way will that be the only time that they come on?

floaterr

Silver - Posts: 383

Joined: December 07, 2002

Location: United States

Posted: March 16, 2003 at 6:57 PM / IP Logged

Wire it like this: Look at this relay for the numbers

86 to ign/ or constant (ign if you dont want to leave

them on by accident)

85 to the 2nd ign output* AND to a swith grounded on

the other side

30 to contant

87 to the neons

* put a diode on this wire with the BAND towards the 2nd ign trigger wire. The switch connection need to made between that diode and the relay. So.. attach the switch and the non-banded side of the diode to the relay and then the banded side connect to the 2nd trigger.

Hope this helps

floaterr

Silver - Posts: 383

Joined: December 07, 2002

Location: United States

Posted: March 16, 2003 at 7:09 PM / IP Logged

Here

Edicius

Copper - Posts: 90

Joined: March 11, 2003

Location: Georgia, United States

Posted: March 20, 2003 at 11:57 PM / IP Logged

If I do it that way will that be the only time that they come on? Is there anyway to have it that way and have a switch to turn them on?

floaterr

Silver - Posts: 383

Joined: December 07, 2002

Location: United States

Posted: March 22, 2003 at 7:36 AM / IP Logged

That's why I put that switch going to ground. Flipping the switch will ground out the trip lead of the relay turning on the neons. When the 2nd ign wire goes negitive (during remote start)it will turn on the neons also.

Edicius

Copper - Posts: 90

Joined: March 11, 2003

Location: Georgia, United States

Posted: March 22, 2003 at 10:39 AM / IP Logged

Ok thanks for the help.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Remote start neon.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.