clifford intelliguard 950

Home / the12volt's Install Bay / Car Security and Convenience / clifford intelliguard 950 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

chrispot

Member - Posts: 10

Joined: December 12, 2008

Location: United Kingdom

Posted: December 12, 2008 at 1:03 PM / IP Logged

hello to everyone, can anyone supply me with the install guide for this alarm, as i wish to add power widow closer and remote boot unlocking, i will also be adding intellistart which i have the install guide for if anyone needs it, best regards chris.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: December 12, 2008 at 3:34 PM / IP Logged

Orange wire is the w/closer trigger, boot switching not applicable without knowing make, model and year, please folow the rules.

chrispot

Member - Posts: 10

Joined: December 12, 2008

Location: United Kingdom

Posted: December 14, 2008 at 8:28 AM / IP Logged

sorry what are the rules, the car is toyota supra twin turbo 1998, what is boot switching?, the orange wire trigger is it a neg or pos switching. the alarm is connected to boot switch with a BROWN / black wire, what i am going to do is fit a solenoid to open boot lock using remote. sorry for any rules broken i am new to this forum, regards chris

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: December 14, 2008 at 1:51 PM / IP Logged

The reason I'm being a bit sarcastic with you is called RTFM. You've got the manual where it tells you orange is a NEG armed out and RED / white t a neg to control a relay to power your trunk release solenoid. In other words read the install guide!!

chrispot

Member - Posts: 10

Joined: December 12, 2008

Location: United Kingdom

Posted: December 15, 2008 at 1:55 PM / IP Logged

I am sorry that we seem to got of on the wrong foot. I take that RTFM meens "read the f'***ing manual" I have not got the install guide for alarm which shows me which wires go where. I only know that BROWN / black is boot sense wire as i was fitting extra LED lighting to the boot last week and could see the connection . what I have got is the install guide for the intellistart as I stated in my first post, correct me if i a wrong orange = window trigger neg o/p. RED / white = neg o/p for relay to boot soleniod. would it be possible to get all the wiring details from you for this alarm, regards chris and happy christmas

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: December 15, 2008 at 3:05 PM / IP Logged

Actually I should apologise, I've been having a bad week! You are right about the colours, can't give you all the conections but if you ask I will tell you, I've realised you are a person of taste frerom your car, N.B. if your mirrors fold, you can use the pink/black aux output set to 3 secs and 1 relay to fold your mirrors.

chrispot

Member - Posts: 10

Joined: December 12, 2008

Location: United Kingdom

Posted: December 16, 2008 at 5:53 AM / IP Logged

apology accepted. you said that i am a person of taste, i take it that you also have a supra, if not you have a good knowledge of cars knowing about the folding mirrors, and yes my mirrors do fold, sounds like a great idea, i will doing that to my car. how do i set pink/black aux o/p to 3 seconds. going back to the remote boot unlocking is the RED / white neg o/p pulsed or continuous. if its continuous i have a simply way of changing it to pulsed, as i dable in electonics, so if there is anything that i can help you with please ask. i also have a full wiring diagram in pdf format for the supra if you need it. keep up the good work, regards chris.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: December 16, 2008 at 6:39 AM / IP Logged

No but I owned one in a previous life! RED / white is already pulsed neg, no need to change. You need to find installer programming for the 950 or send me your email address, you can make acc 3 work as a timed output, find the mirror feed wire at the switch that goes from neg to pos when you fold the mirror, then term 30 to mirrors, term 87a back to switch, terminals 87 and 86 to 12v+@ 5amps fused and 85 to aux 3.

chrispot

Member - Posts: 10

Joined: December 12, 2008

Location: United Kingdom

Posted: December 16, 2008 at 4:04 PM / IP Logged

thanks very much for info, i dont know if its the same as the installer programming i have the cliffnet wizard, i have never connected to alarm just installed the software. i had a quick look at software but there is no mention of setting any of the acc o/p's to timed, could you also tell me what acc o/p wire colours are for acc channel A B and C, i know 2 of the wires are RED / white and pink/black, (information from yourself) but what channel are they on, i will send you a personal message of my email address. i bet your car has quite few gadgets and gizzmos on it knowing what you know, thanks once again chris.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford intelliguard 950

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.