driver door quit convenience unlocking

Home / the12volt's Install Bay / Car Security and Convenience / driver door quit convenience unlocking (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mobilewizard

Member - Posts: 4

Joined: November 28, 2008

Location: Ohio, United States

Posted: December 14, 2008 at 11:13 AM / IP Logged

hooked up remote start door unlock and door lock in 2008 e series van and the remote start locks and unlocks the door but the driver door quit unlocking for convenience when opened with key in on position to keep from getting locked out.

Spellblinder

Back to Top

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: December 14, 2008 at 12:03 PM / IP Logged

See if the van's keysense and doorpin circuits are functioning correctly.

Ignition off, key in ignition, door open. You should hear the key-in-ignition warning chime, and of course the domelight should come on.

If the domelight's on but the chime isn't, the keysense wire might have been broken, or the (fragile) keysense switch inside the key cylinder could have gotten bent out of shape.

If the domelight's not on, maybe something with the door pin switch circuit is faulty.

Back to Top

mobilewizard

Member - Posts: 4

Joined: November 28, 2008

Location: Ohio, United States

Posted: December 14, 2008 at 12:24 PM / IP Logged

keysence is working. I have chime and domelight. The van now locks all doors when I put the key in the ignition and turn it to on. It only used to after I began driving.

The remote start i put in is a viper 160xv. Hooked loc to pinkw / YELLOW and unlock to pink/lt. green. When I disconnect the wires it still does not convenience unlock with the driver door open and key in ignition.

Spellblinder

Back to Top

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: December 14, 2008 at 2:09 PM / IP Logged

For the convenience unlocking - try it with the key turned to on perhaps? Or disconnect the battery for a few minutes and try again.

For the automatic lock with ignition on - the Viper is probably controlling the locks there. If you'd like to disable this it can be done by changing the program settings on the Viper.

C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two

Back to Top

Search for other posts by chriswallace187

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

driver door quit convenience unlocking

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.