dei door lock actuators on civic ef '90

Home / the12volt's Install Bay / Car Security and Convenience / dei door lock actuators on civic ef '90 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

franckcrx

Member - Posts: 8

Joined: November 18, 2008

Location: Malta

Posted: December 20, 2008 at 7:16 AM / IP Logged

Hi.

With the help of this forum and the help of Hondatech, i installed my alarm the best way.

So thanks ;-)

Now, i want to add power door lock actuators (DEI 524) on my Civic EF9'90 (with power windows) on to the Hirnet 563T alarm.

Can someone tell me if i have to pass trough relays as some guys specialized in alarms here in Malta tells me not to ?

I personnaly think i need SPDT relays.

Can someone tell me how to plug my actuators

i have 1 green wire and 1 blue wire on the actuator, and 1 green and 1 blue on the alarm.

If i connect the blueS together and the greenS together, it wont work ?

Thank you for your help ;-)

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: December 20, 2008 at 12:02 PM / IP Logged

Green on alarm to 85, 12V+ at 25 amps (assuming 4 doors) to 86 and 87, 87a to ground and 30 to green lock wire on actuator (assuming it "pulls" down to lock). Blue on alarm to 85, 12V+ same feed as above, to 86 and 87, 87a to ground and 30 to blue unlock wire on actuator.

franckcrx

Member - Posts: 8

Joined: November 18, 2008

Location: Malta

Posted: December 20, 2008 at 12:40 PM / IP Logged

Thank you ;-) i keep it in mind

To make it easier and cleaner, i am gonna get DEI 451M from US, as it is already hard to find SPDT relays here.

joch1314

Copper - Posts: 301

Joined: March 25, 2008

Location: Texas, United States

Posted: December 20, 2008 at 2:50 PM / IP Logged

With the DEI 451m it will be a little easier....Just connect it to your brain then 12V+ to the purple and PURPLE / black(they're more than likely already tied together). BROWN / black and WHITE/ black go to ground. Green black goes to the green wire of the actuator and blue/black goes to the blue wire of the actuator. That should get you all set.

...half of the truth can be worse than a lie. <----Roger Russell said that..

franckcrx

Member - Posts: 8

Joined: November 18, 2008

Location: Malta

Posted: December 20, 2008 at 3:01 PM / IP Logged

Thank you very much. It helps me A LOT

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dei door lock actuators on civic ef '90

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.