the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

06 pt cruiser keyless entry


Post ReplyPost New Topic
< Prev Topic Next Topic >
customworks 
Member - Posts: 11
Member spacespace
Joined: February 07, 2004
Location: United States
Posted: December 22, 2008 at 4:30 PM / IP Logged  

Having trouble with unlock from Prestige APS45B keyless entry.  Lock working good through 1K ohm resistor. Using 250 ohm resistor on unlock with no luck. I can get it to unlock by swapping door lock wires out of keyless entry module and hitting lock button on remote, but then no lock. This is on a 2006 PT Cruiser. Using light GREEN/ dk. green single lock wire.

Any suggestions???

customworks
soundnsecurity 
Gold - Posts: 2,711
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 10, 2008
Location: Louisiana, United States
Posted: December 22, 2008 at 4:51 PM / IP Logged  
can you test the unlock output from the keyless module you are installing? if that output is busted after all then you might be able to rig something to the 2nd unlock or factory disarm wire if your unit has these. also you might need to use relays as a last resort.
customworks 
Member - Posts: 11
Member spacespace
Joined: February 07, 2004
Location: United States
Posted: December 22, 2008 at 5:53 PM / IP Logged  
Got it. Thanks. By mistake, I was on the 2nd door unlock output (RED / blk) instead of unlock output (red).
customworks

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 8, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer