viper 5000 2 way recognition

Home / the12volt's Install Bay / Car Security and Convenience / viper 5000 2 way recognition (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

doitpropa

Member - Posts: 28

Joined: January 09, 2009

Location: Connecticut, United States

Posted: January 09, 2009 at 8:58 PM / IP Logged

well my buddy danny he's on this site also not sure if his name is the same but possibly single slam 12 .. just installed my viper 5000 i found on craigslist and were having a problem getting anything through the transmitter to the brain we tried the relearn that was posted on here nd once nd only once u got the led to blink like 3 times nd nothing again we tried 4 a couple hours any tips or ideas .. i'm going to call the kid i got it from again tomorrow but we didn't seem like much help ... try to find out if it was writin in w/ a bitwriter. he said that mayb it lost the recognition from being unhooked?? u guys ever heard of that ..

o yea i'm new to the site ppl call me caz nd thank you 4 ur help hope i can give back to the community :)

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: January 09, 2009 at 9:14 PM / IP Logged

Welcome here. What procedure are you using, exactly?

Try keep your writing to at least semi-proffessional level. Using letters as synonyms for words, can be mistaken for something else, as we are not IM'g here.

Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

doitpropa

Member - Posts: 28

Joined: January 09, 2009

Location: Connecticut, United States

Posted: January 09, 2009 at 9:19 PM / IP Logged

i'm sorry about that i get it from the other forums i'm on ... and i'm using the procedure from the manual that was posted on here i found when i was searching

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: January 09, 2009 at 9:47 PM / IP Logged

First, I would program 1 remote you already have using the instructions at the bottom of page 29. Select AUTO/LEARN. You must have your door trigger wire conneted to operate this routine.

Second, starting the routine over again and using that remote, select Delete All Transmitters. Then go back and relearn the remote and any extra remotes you want controlling the system.

This will make sure there are no unauthorized remotes programmed.

Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

doitpropa

Member - Posts: 28

Joined: January 09, 2009

Location: Connecticut, United States

Posted: January 09, 2009 at 9:58 PM / IP Logged

the thing is i'm not sure if i'm getting anything from the valet/program button besides the one time the l.e.d. blinked we had nothing is there a way to see if the valet button is good besides trying to track down and buy another one? since its 11 0clock i don't need the siren going off tonight if i can get it to work so i'll try the delete then relearn tomorrow

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: January 09, 2009 at 10:00 PM / IP Logged

Ok.. You might want to re-read my reply. I was updating it when you replied. Remember, the door trigger must be connected, from the alarm.

Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

doitpropa

Member - Posts: 28

Joined: January 09, 2009

Location: Connecticut, United States

Posted: January 09, 2009 at 10:05 PM / IP Logged

the door trigger i hooked up but i'm bout to say f- it nd go try the delete relearn now any ways

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: January 09, 2009 at 10:07 PM / IP Logged

You need to learn first, then delete, and finally relearn.

Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

doitpropa

Member - Posts: 28

Joined: January 09, 2009

Location: Connecticut, United States

Posted: January 09, 2009 at 10:08 PM / IP Logged

is there a way to edit my posts or do i have to wait a certain amount of time /post ? i see on the bottom it says i can't j/w y ?

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: January 09, 2009 at 10:12 PM / IP Logged

50 posts or more.

Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.