'08 chevy uplander pkg 9

Home / the12volt's Install Bay / Car Security and Convenience / '08 chevy uplander pkg 9 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

gr3atm3linko

Member - Posts: 28

Joined: December 08, 2005

Location: Ohio, United States

Posted: January 14, 2009 at 10:20 AM / IP Logged

i installed a remote starter on a 2008 chevy uplander, I have an xk06 w/ pkg9 firmware but I do not have the right pk3 wiring schematic for that vehicle. All the diagrams I have are for a 5 pin harness, this only has 3 wire exiting from the pk3 ring, BLACK/ white, pink, and red. does anyone know which wires to use?

Back to Top

robertsc

Copper - Posts: 337

Joined: December 21, 2007

Location: Ontario, Canada

Posted: January 14, 2009 at 11:36 AM / IP Logged

pkg5 is what you need for firmware

http://www.bypasskit.com/getdocument.aspx?documentid=586

Back to Top

gr3atm3linko

Member - Posts: 28

Joined: December 08, 2005

Location: Ohio, United States

Posted: January 15, 2009 at 8:40 AM / IP Logged

pkg5 is what i have loaded and installed, key has to be in the ignnition during r-start to avoid codes.i was told to try pkg 9 from tech support but no one knows the wiring...including the dealer.

Back to Top

robertsc

Copper - Posts: 337

Joined: December 21, 2007

Location: Ontario, Canada

Posted: January 15, 2009 at 11:06 AM / IP Logged

if you look at the link i provided the diagram is right there

and if can't handle those instructions its time to hand the install to somebody else

Back to Top

gr3atm3linko

Member - Posts: 28

Joined: December 08, 2005

Location: Ohio, United States

Posted: January 16, 2009 at 10:02 AM / IP Logged

incorrect. the diagram is wrong, it is installed that way now, as per the diagram. Wrong Firmware!

Back to Top

robertsc

Copper - Posts: 337

Joined: December 21, 2007

Location: Ontario, Canada

Posted: January 16, 2009 at 4:43 PM / IP Logged

so let see if i can get this right

you have the wrong firmware and your trying to make it work?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

'08 chevy uplander pkg 9

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.