the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2006 dodge ram cruise control prob after


Post ReplyPost New Topic
< Prev Topic Next Topic >
newman2ng 
Member - Posts: 7
Member spacespace
Joined: January 18, 2009
Location: New York, United States
Posted: January 18, 2009 at 1:07 PM / IP Logged  
Installed a galaxy 1900rs in a 2006 dodge ram diesel. Eveything went good and the start works great when the customer left he said that the squares around the shift Indicators in the dash only lit up in park and nuetral. On his way home he said he tried the cruise control and it wouldn't work. Just before getting home his check engine light came on. Is this something with the remote start? I used a pkuch2gx which I use on all newer dodges and have never had a problem like this. Any pointers? Thanks
12vstunna 
Member - Posts: 16
Member spacespace
Joined: January 14, 2009
Location: California, United States
Posted: January 18, 2009 at 1:15 PM / IP Logged  
tell me what wires you grabbed xactly i think i can help you
WHO NEEDS M.E.C.P ITS JUST A CERTIFICATE,OH AND I GOT THE SKILL TO PROVE THAT I DONT NEED ONE~XxX12vStunnaXxX~    X-Mobile Solutions
newman2ng 
Member - Posts: 7
Member spacespace
Joined: January 18, 2009
Location: New York, United States
Posted: January 18, 2009 at 3:15 PM / IP Logged  
Power at ign harness
Start. At ign harness. GREEN/ YELLOW+
Ignition at ign harness. Pink/white+
Mux wire at ign harness. PURPLE / brown-(from bypass)
Brake. At pedal.   White tan+
Parking lights at harness. WHITE/ green-1130 resistor through relay
Thanks
12vstunna 
Member - Posts: 16
Member spacespace
Joined: January 14, 2009
Location: California, United States
Posted: January 18, 2009 at 3:26 PM / IP Logged  

im sure your prolem is power i think i had that problem when they first came out only my install went worse i ble out the computer so well now im gonna help you out

12 volt -12ga ORANGE / red in connector next to parking brake yes thats correct the parking brake

ign. pink white at ignition harnes

starter GREEN/ YELLOW

o it looks like all your wire is cool but power try that and unplug the battery and well it should fix your problem its funny but that wire at the ign harnss is a no no on dodge,for som reason dodges are picky on the way they like to be touched so do as i said and you should be good

WHO NEEDS M.E.C.P ITS JUST A CERTIFICATE,OH AND I GOT THE SKILL TO PROVE THAT I DONT NEED ONE~XxX12vStunnaXxX~    X-Mobile Solutions
12vstunna 
Member - Posts: 16
Member spacespace
Joined: January 14, 2009
Location: California, United States
Posted: January 18, 2009 at 3:29 PM / IP Logged  
oh and lights use same wire but give it 3.3k ohm resistor (negative lights)oh and if alarm has negative output on lights remove relay its realy not needed
WHO NEEDS M.E.C.P ITS JUST A CERTIFICATE,OH AND I GOT THE SKILL TO PROVE THAT I DONT NEED ONE~XxX12vStunnaXxX~    X-Mobile Solutions

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer