window control module

Home / the12volt's Install Bay / Car Security and Convenience / window control module (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

eddie357

Member - Posts: 2

Joined: October 12, 2004

Location: United States

Posted: January 27, 2009 at 4:17 PM / IP Logged

i have a question i want to use a window control module to control a actuator looking at the crimestopper cs-5601 module where you normally cut the window switch to install the module between the motor and switch is it possible to just install the module directly to the motor/actuator.

Eddie N. Barnes

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 28, 2009 at 9:41 AM / IP Logged

Yes but you still have to cut the motor wires , you're a bit vague but can I assume you are trying to do without a switch? If so you will still need to connect the switch sides to ground.

Back to Top

eddie357

Member - Posts: 2

Joined: October 12, 2004

Location: United States

Posted: January 28, 2009 at 10:21 AM / IP Logged

yes, i am trying do away with the door switch.

Eddie N. Barnes

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

window control module

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.