1988 suzuki samurai, giordon alarm/rs

So, I bought a cheap ebay Giordon MS686-II Motorcycle alarm/remote start. I mainly bought it to use the ignition cut feature, and remote start. I'm about to wire it up and want to make sure I have my wiring figured out. The first image is the supplied wiring diagram, and the second image is my proposed install.

Any input would be great. the 2 wires I'm not sure about are the Pink and Gray. I dont really have an extinguish wire on my key cylinder. I did hook the unit up on a "test bench" and it doesnt seem like the pink and gray wire are related on a relay or anything. I get no voltage on it or continuity between the 2 (armed or disarmed), an no continuity to ground.

Thanks,

well i tried it cutting the ign wire and the starter wire (seperate tries) neither worked. If i splice the ign wire, it will crank and not start, even w/ remote start, if i cut the starter wire, i get power but wont crank. armed or disarmer, or remote start.

but now i do have a remote start and a mild alarm, but not what i initially wanted.

I might pull it out and throw it on the bench to see if i can figure out whats up. If anyone has any ideas, feel free to let me know.