Viper 550 - 2002 Honda Accord

I have a 2002 Honda Accord with a factory security system. I have installed the Viper 550 into the car, but now having problems. Lock = "ARM" Unlock = "DISARM" on the factory security.  I connected the Viper door lock & unlock wires to those wires in the drivers door and to the power door lock & unlock wire on the pass. side fuse block. (All "NEGATIVE" triggered).   Viper has these wires : GREEN/ black  wire - factory security disarm  -- 1 sec before remote start activates.    Blue wire -- factory security rearm.  Both wires are "NEGATIVE" outputs, only work for remote start portion of the unit.  How would I connect these wires so I don't have the car locking and unlocking when remote starting.???

Any help at all is appreciated, thanks guys.

Attach the GREEN/ black  wire - factory security disarm  -- 1 sec before remote start activates to the BLUE wire found at the driver's door lock switch. Look here at these posts for more information:

• 2002 honda accord ex
• 98 accord disarm wire