adding power door locks

Home / the12volt's Install Bay / Car Security and Convenience / adding power door locks (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

sworrix222

Member - Posts: 15

Joined: May 08, 2008

Posted: February 21, 2009 at 3:27 PM / IP Logged

i have a 2004 chevy silverado base model i also have a valet 562t remote start i purchased 2 2 wire actuators can any one tell me how to wire the door locks with no switches inside the car will the green and blue wire run both door lock actuators..it has a relay satelitre do i need to run seperate relays????thanks shawn

Back to Top

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: February 21, 2009 at 5:36 PM / IP Logged

adding power door locks -- posted image.

use this diagram, the blue connects to the unlock output, and the green to the lock.

commit your way to jehovah and he will act in your behalf. psalms 37:5

Back to Top

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: February 21, 2009 at 6:42 PM / IP Logged

To further simplify, the R/S's BLUE unlock/lock wire goes to the unlock relay. The R/S's GREEN lock/unlock wire goes the lock relay. If the actuators are operating in reverse, then swap the R/S's BLUE and GREEN wires.

Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 22, 2009 at 2:23 PM / IP Logged

You can get really flash here and run a single pole double throw momentary switch accross the green and blue 526 lock output wires before the relay, just ground the centre contact, or use a 5 terminal Spal window switch, ground the centre contact and feed to the two outers. Sorry that nitro BMW guy has teed me off.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

adding power door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.