09 saturn aura

Home / the12volt's Install Bay / Car Security and Convenience / 09 saturn aura (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dhookjr

Member - Posts: 3

Joined: April 25, 2005

Location: United States

Posted: March 21, 2009 at 9:29 PM / IP Logged

Need some help w/ an 09 Saturn Aura Transponder info. picked up a dlkgm module that doesn't seem to work, also read of the XK06 draining the battery. IN combination w/ this what data wire do I connect to? I've got one tech sheet that says Dk Green Pin 1 at connector under the drivers dash. Other that says a white at connector in center console fuse panel or WHITE/ black in center console fuse panel.

Any info would be greatly appreciated..

chadwa2003

Copper - Posts: 353

Joined: January 08, 2005

Location: Canada

Posted: March 22, 2009 at 8:29 PM / IP Logged

use a ads-al-ca idatalink.ca it will do everything for you and it should be easier to install. Also if you use a remote starter with an rs-232 port it will minimize your connections

davlop

Member - Posts: 4

Joined: March 23, 2009

Location: Texas, United States

Posted: March 23, 2009 at 11:03 AM / IP Logged

I second that module!! 09 saturn aura -- posted image.

Good product and is an easy install and has many extra features!!

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: March 23, 2009 at 2:10 PM / IP Logged

chadwa2003 wrote:

.. Also if you use a remote starter with an rs-232 port it will minimize your connections

Not all manufacturers with RS-232 ports use the same protocols.

Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

jim hunter

Silver - Posts: 351

Joined: March 23, 2006

Location: United States

Posted: April 22, 2009 at 11:16 AM / IP Logged

as with pretty much all new gm vehicles i program a blank key and use a universal key inbox bypass,ring takes some work to get in around dash(same as 09 malibu)but at least this way if something remote start fails car stil starts with key, cutting cars reader wires routing them thru bypass could cause no start with key if bypass fails, only need ignition/accessory/constant hot at ign no requirement for whit wire with resistors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

09 saturn aura

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.