add an extra remote to a viper 5901

Well, I bought an extra 1 way remote for my Viper 5901. Could somebody help me figure out how to program it into the 5901?

No owner's manual?  

It states that DEI prefers that a professional program the remote. No directions.

click and hold the function button for 3 seconds then press function again till car 2 is illuminated. Then do your normal programing.

1) Press  the f button on the remote until the led stays on

2) Press the start button until it flashes 3 times3) Turn ignition swith to on position4) On the antenna. do the following with the switch....press / release / press and hold...You'll hear a horn chirp...5) Press the lock button on the remote, you should hear a horn chirp..6) Release switch and turn off ignition switch...you'll hear another chirpYou are done.....

Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.